European Crane, Mobile Lifting Electric Hoist, Stationary Electric Hoist

• Customization: Available
• After-sales Service: Paid Repairs
• Warranty: Within One Year of Leaving The Factory
• Model NO.: DC-COM/PRO
• Condition: New
• Operation Form: Air Operation+Ground Operation
• Maximum Lifting Height: >40m
• Maximum Lifting Weight: >200t
• Transport Package: Original Wooden Case/Carton
• Origin: China

Product Description

DC-Com electric chain hoist is the main model of the fourth generation electric chain hoist. It is designed for use in most industrial applications, especially where the general operating frequency and speed requirements are not too high. The DC-Com is a very cost-effective chain hoist. The DC-Com hoist can be used as a fixed hoist alone or in combination with a light crane or an I-beam/H-beam crane for more uses.
Lifting capacity: 125kg - 2000kg
Standard two-speed lift
Standard upper and lower limits
24V low voltage, intelligent control
The length of the hand-held perpendicular line can be adjusted freely
Motor protection level: IP55
Transmission, brakes and clutch 10 years
Maintenance-free Plug and play, installation and maintenance
Convenient Small size, light weight, structure
Compact manual running trolley U11/U22/U34 is a load trolley specially designed for DC hoist, which can be run on I-beam rail or H-shaped steel track. They have a load capacity of 1100 kg, 2200 kg and 3400 kg, respectively.

Universal trolley wheels can run on either I-rail or H-rail.
It can be used for different widths of rails up to 310 mm.
The U11 and U22 come standard with high-strength nylon wheels for low weight, low running resistance and less track wear.
The U34 comes standard with ductile iron wheels. The U11 and U22 are available with ductile iron wheels for maximum load capacity.
There are steel guide wheels on the side for smoother operation.
Equipped with anti-drop device, high safety.
It can be directly equipped with an E11/E22 drive motor to become an electric running trolley.
The drive motors E11/E22/E34 can be mounted directly on the manually operated trolley and become an electric running trolley, making lifting and handling easier and more stable.
It can be mounted directly on the U11/U22/U34 hand trolley, which is very convenient.
IP55 rated.
Operating ambient temperature: -20 degrees to +40 degrees.
With motor temperature monitoring.
All electrical connections are plug-in for easy installation.
The board integrates travel limit and fast/slow transfer switch control.
The E22 drive motor can also be mounted on the crane's RF125 trolley.
Electricity is taken directly from the DC lift, eliminating the need for additional power distribution.
Running speed and acceleration/deceleration parameters can be set via a handheld controller.
Built-in load anti-sway program, which can be *** as needed.
When equipped with DCS-PRO hoist, it can realize stepless speed regulation of walking frequency conversion.nce-free, gearbox maintenance-free, very popular in China